Price: $17.99
(as of May 03, 2025 22:27:13 UTC – Details)


The remote control with 100% brand new and high quality works for Dish 20.1 Network IR Satellite Receiver SAT, TV, DVD.
Program Method
1. States to push Dish receiver System Info button.
2. Then push the “Dish” button on remote, press record button on remote.
3. Then hit the Done on the screen.
TV and DVD code setting:
Keep pressing the TV or DVD device keypads in three seconds, when the lights always bright, enter the four codes of the device. The red light flashes one time while inputing one code, after the input completion, the red light flashes twice, then extinguished successfully. (If the red light is on for two seconds and then goes out, the setting fails and needs to be reset.)
AUX keypad can be used to set up TV and DVD device functions.
Three devices codes are: TV:0 DVD:1 AUX:2
Keep pressing the AUX device keypad in three seconds, when the lights always bright, enter the code of the device. (For example: if you want to set TV, please input 0), after inputing the codes, the light flashes once and continues to be bright.
After input the code, the red light flashes twice and continues to be bright. At this moment input the four codes of the device, the red light flashes one time while inputing one code. After the input is completed, the red light flashes twice and then extinguished.(If the red light is always bright for two seconds and then goes out, the setting fails and needs to be reset.)
(1): TV and DVD code searching
After pressing the device you want to set for three seconds, the device light is always bright. (While code searching, the device light is always bright.) At this moment, press the POWER key and the light flashes one time and continuse to be bright. Press the (UP) keypad to begin the searching. (Power supply keypad code) transmit code in order, the red light flashes once each time the keypad (UP) is pressed as long as the device you want to control is powered off. Press the # button to exit the setting.
(2): AUX code searching
AUX device keypad can be used for searching TV and DVD devices functions.
Three devices codes are: TV:0 DVD:1 AUX:2
Keep pressing the AUX device keypad in three seconds, when the keypad light is always bright, enter the code of the device. (For example: if you want to set TV, please input 0), after inputing the codes, the light flashes once and continues to bright.
Press (*) button to double confirm it, the light flashes one time, at this moment press POWER keypad, the light flashes once and continues to be bright. Press (UP) keypad to begin the searching (Power supply keypad code). Transmit code in order, the red light flashes once each time the keypad (UP) is pressed as long as the device you want to control is powered off. Press the (#) button to exit the setting.
The remote control with 100% brand new and high quality works for Dish 20.1 Network IR Satellite Receiver SAT, TV, DVD.
Use Method: States to push Dish receiver System Info button. Then push the “Dish” button on remote, press record button on remote. Then hit the Done on the screen. More function just need to follow the instructions to simple program can work well for dish network remote control! (Batteries are not included!).
With upgraded intelligent chip, all the programs and videos you want to watch can be called up in 0.2 seconds! The lightweight and ergonomic design makes it very comfortable and perfect for everyone. It’s the ideal choice when your original remote is lost, broken, or when you want a new one.
Package list: 1* remote control for dish network tv, 1* manual.
TV and DVD code setting: Keep pressing the TV or DVD device keypads in three seconds, when the lights always bright, enter the four codes of the device. The red light flashes one time while inputing one code, after the input completion, the red light flashes twice, then extinguished successfully. (If the red light is on for two seconds and then goes out, the setting fails and needs to be reset.)
TV and DVD code searching: After pressing the device you want to set for three seconds, the device light is always bright. (While code searching, the device light is always bright.) At this moment, press the POWER key and the light flashes one time and continuse to be bright. Press the (UP) keypad to begin the searching. (Power supply keypad code) transmit code in order, the red light flashes once each time the keypad (UP) is pressed as long as the device you want to control is powered off. Press the # button to exit the setting.